博客
关于我
强烈建议你试试无所不能的chatGPT,快点击我
Oracle 19c使用dbca来搭建物理DG
阅读量:2043 次
发布时间:2019-04-28

本文共 12653 字,大约阅读时间需要 42 分钟。

Using DBCA to Create a Data Guard Standby

The Database Configuration Assistant (DBCA) can also be used as a simple command-line method to create an Oracle Data Guard physical standby database.

The DBCA command qualifier used to create the physical standby database is createDuplicateDB .

DBCA can only be used to create standby databases for non-multitenant primary databases. In addition, this capability creates only single instance standby databases,not Oracle Real Application Clusters (Oracle RAC) databases. If required, the standby can then be converted to an Oracle RAC standby database, either manually or using Oracle Enterprise Manager Cloud Control.

主备配置rman参数:CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;如果11g的adg,如果没有打补丁(11.2.0.4.161018之前版本),添加参数:alter system set "_ktb_debug_flags"=8 scope=both sid='*';

在 12cR2 ( 12.2.0.1 )之前创建物理备库的方法有:

1 、使用 RMAN 备份恢复方法;

2 、在 11g 时可以选择 duplicate 方式创建物理备库;通过这种方式直接在线从主库搭建物理备库。

到 12cR2 ( 12.2.0.1 )后, Oracle 又提供更简单的方式来创建物理备库,即使用 DBCA 方式直接建立物理备库。这个功能再次简化了创建备库的复杂度。

通过 DBCA 提供的参数 createDuplicateDB 可以很容易的搭建一个物理备库。其具体语法如下:

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

-------------- 12cR2

-createDuplicateDB - Command to Duplicate a database.

        -gdbName <Global database name>

        -primaryDBConnectionString <EZCONNECT string to connect to primary database for example "host:port/servicename">

        -sid <Database system identifier>

        [-createAsStandby <Option to create a standby database>]

                [-dbUniqueName <db_unique_name for standby db>]

        [-customScripts <A comma separated list of SQL scripts which needs to be run post db creation.The scripts are run in order they are listed>]

        [-datafileDestination <Destination directory for all database files>]

        [-initParams <Comma separated list of name=value pairs>]

                [-initParamsEscapeChar <Specify escape character for comma when a specific initParam has multiple values.If the escape character is not specified backslash is the default escape character>]

  

  

  

----------- 18c

-createDuplicateDB - Command to Duplicate a database.

        -gdbName <Global database name>

        -primaryDBConnectionString <EZCONNECT string to connect to primary database for example "host:port/servicename">

        -sid <Database system identifier>

        [-initParams <Comma separated list of name=value pairs>]

                [-initParamsEscapeChar <Specify escape character for comma when a specific initParam has multiple values.If the escape character is not specified backslash is the default escape character>]

        [-policyManaged | -adminManaged]

        [-policyManaged <Policy managed databasedefault option is Admin managed database>]

                -serverPoolName <Specify the single server pool name in case of create server pool or comma separated list in case of existing server pools>

                [-pqPoolName <value>]

                [-createServerPool <Create a new server pool, which will be used by the database>]

                        [-pqPoolName <value>]

                        [-forceServerPoolCreation <To create server pool by force when adequate free servers are not available. This may affect the database which is already in running mode>]

                        [-pqCardinality <value>]

                        [-cardinality <Specify the cardinality of the new server pool that is to be created, default is the number of qualified nodes>]

        [-adminManaged <Admin managed database, this is default option>]

        [-datafileDestination <Destination directory for all database files>]

        [-nodelist <Node names separated by comma for the database>]

        [-databaseConfigType <SINGLE | RAC | RACONENODE>]

                [-RACOneNodeServiceName <Service name for the service to be created for RAC One Node database. This option is mandatory when the databaseConfigType is RACONENODE>]

        [-createAsStandby <Option to create a standby database>]

                [-dbUniqueName <db_unique_name for standby db>]

        [-customScripts <A comma separated list of SQL scripts which needs to be run post db creation.The scripts are run in order they are listed>]

  

  

  

  

----------- 19c

  

-createDuplicateDB - Command to Duplicate a database.

        -gdbName <Global database name>

        -primaryDBConnectionString <EZCONNECT string to connect to primary database for example "host:port/servicename">

        -sid <Database system identifier>

        [-useWalletForDBCredentials <true false> Specify true to load database credentials from wallet]

                -dbCredentialsWalletLocation <Path of the directory containing the wallet files>

                [-dbCredentialsWalletPassword <Password to open wallet with auto login disabled>]

        [-initParams <Comma separated list of name=value pairs>]

                [-initParamsEscapeChar <Specify escape character for comma when a specific initParam has multiple values.If the escape character is not specified backslash is the default escape character>]

        [-policyManaged | -adminManaged]

        [-policyManaged <Policy managed databasedefault option is Admin managed database>]

                -serverPoolName <Specify the single server pool name in case of create server pool or comma separated list in case of existing server pools>

                [-pqPoolName <value>]

                [-createServerPool <Create a new server pool, which will be used by the database>]

                        [-pqPoolName <value>]

                        [-forceServerPoolCreation <To create server pool by force when adequate free servers are not available. This may affect the database which is already in running mode>]

                        [-pqCardinality <value>]

                        [-cardinality <Specify the cardinality of the new server pool that is to be created, default is the number of qualified nodes>]

        [-adminManaged <Admin managed database, this is default option>]

        [-datafileDestination <Destination directory for all database files>]

        [-nodelist <Node names separated by comma for the database>]

        [-databaseConfigType <SINGLE | RAC | RACONENODE>]

                [-RACOneNodeServiceName <Service name for the service to be created for RAC One Node database. This option is mandatory when the databaseConfigType is RACONENODE>]

        [-createAsStandby <Option to create a standby database>]

                [-dbUniqueName <db_unique_name for standby db>]

        [-customScripts <A comma separated list of SQL scripts which needs to be run post db creation.The scripts are run in order they are listed>]

 

虽然通过 DBCA 能非常简单的创建一个物理备库,但是要使用这个功能,必须满足以下条件:

①  主库必须是单机环境,非 RAC 数据库;

②  主库必须是非 CDB 环境;

如果不满足以上条件, 那么 在使用 DBCA 创建备库的时候,会提示如下错误:

若 主库是 CDB 环境,错误如下:

1

2

[FATAL] [DBT-16057] Specified primary database is a container database (CDB).

CAUSE: Duplicate database operation is supported only for non container databases.

若 主库是 RAC 数据库,错误如下:

1

2

[FATAL] [DBT-16056] Specified primary database is not a Single Instance (SI) database.

CAUSE: Duplicate database operation is supported only for SI databases.

也就说通过 DBCA 搭建出来的备库也是一个单机非 CDB 的备库。

需要注意的是,在 12cR2 ( 12.2.0.1 )中,通过 DBCA 创建物理需要保证主库是单机非 CDB 的库,但是从 Oracle 18c ( 12.2.0.2 )开始,这些限制条件已经取消了,即主库是 CDB 或 rac 环境都可以通过 dbca 来创建物理备库。

以下命令为 18c 中创建 rac 类型的 dg :

1

2

3

4

5

6

7

8

9

10

11

dbca -silent -createDuplicateDB \

-gdbName lhrdb \

-sid lhrdbdg \

-sysPassword oracle \

-primaryDBConnectionString 192.168.20.10:1521/lhrdb \

-nodelist rac18c-n1,rac18c-n2 \

-adminManaged \

-databaseConfigType RAC \

-createAsStandby -dbUniqueName lhrdbdg \

-datafileDestination '+DATA' \

-initParams db_create_file_dest=+DATA, db_create_online_log_dest_1=+DATA,local_listener="(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.20.10)(PORT=1521)))"

 

基于同一个主机搭建 单实例的物理 DG ( 19c ):

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

SELECT CDB FROM  V$DATABASE

alter database force logging;

alter database open;

alter database archivelog;

alter pluggable database all open;

alter pluggable database  all save state;

  

select thread#,group#,bytes/1024/1024 SIZE_MB, status,members from v$log;

select member from v$logfile;

alter database add standby logfile thread 1 group '/u01/app/oracle/oradata/LHR19C/standby_redo04.log'   size 50M ;

alter database add standby logfile thread 1 group '/u01/app/oracle/oradata/LHR19C/standby_redo05.log'   size 50M ;

alter database add standby logfile thread 1 group '/u01/app/oracle/oradata/LHR19C/standby_redo06.log'   size 50M ;

alter database add standby logfile thread 1 group '/u01/app/oracle/oradata/LHR19C/standby_redo07.log'   size 50M ;

  

--------配置tns

lhr19c =

  (DESCRIPTION =

    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.59.52)(PORT = 1522))

    (CONNECT_DATA =

      (SERVER = DEDICATED)

      (SERVICE_NAME = lhr19c)

    )

  )

  

lhr19cdg =

  (DESCRIPTION =

    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.59.52)(PORT = 1522))

    (CONNECT_DATA =

      (SERVER = DEDICATED)

      (SERVICE_NAME = lhr19cdg)

    )

  )

  

--------配置监听

LISTENER =

  (DESCRIPTION_LIST =

    (DESCRIPTION =

      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.59.52)(PORT = 1521))

    )

  )

  

SID_LIST_LISTENER =

  (SID_LIST =

    (SID_DESC =

      (GLOBAL_DBNAME = lhr19c)

      (ORACLE_HOME = /u01/app/oracle/product/19.2.0/dbhome_1)

      (SID_NAME = lhr19c)

    )

    (SID_DESC =

      (GLOBAL_DBNAME = lhr19cdg)

      (ORACLE_HOME = /u01/app/oracle/product/19.2.0/dbhome_1)

      (SID_NAME = lhr19cdg)

    )

  )

  

LISTENER_DG =

  (DESCRIPTION =

    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.59.52)(PORT = 1522))

  )

  

SID_LIST_LISTENER_DG =

  (SID_LIST =

    (SID_DESC =

      (GLOBAL_DBNAME = lhr19c)

      (ORACLE_HOME = /u01/app/oracle/product/19.2.0/dbhome_1)

      (SID_NAME = lhr19c)

    )

    (SID_DESC =

      (GLOBAL_DBNAME = lhr19cdg)

      (ORACLE_HOME = /u01/app/oracle/product/19.2.0/dbhome_1)

      (SID_NAME = lhr19cdg)

    )

  )

  

lsnrctl start LISTENER_DG

  

  

dbca -silent -createDuplicateDB \

-gdbName lhr19c \

-sid lhr19cdg \

-sysPassword lhr \

-primaryDBConnectionString 192.168.59.52:1522/lhr19c \

-nodelist raclhr-18c-n1 \

-databaseConfigType SINGLE \

-createAsStandby -dbUniqueName lhr19cdg \

-datafileDestination '/u01/app/oracle/oradata/lhr19cdg/' \

-initParams db_create_file_dest=/u01/app/oracle/oradata/lhr19cdg/, db_create_online_log_dest_1=/u01/app/oracle/oradata/lhr19cdg/,local_listener="(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.59.52)(PORT=1522)))"

  

  

  

  

--主库修改参数

alter system set LOG_ARCHIVE_DEST_1='LOCATION=USE_DB_RECOVERY_FILE_DEST  VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=lhr19c';

alter system set LOG_ARCHIVE_DEST_2='service=lhr19cdg  VALID_FOR=(online_logfiles,primary_role) DB_UNIQUE_NAME=lhr19cdg';

alter system set log_archive_config='dg_config=(lhr19c,lhr19cdg)';

alter system set db_file_name_convert='/u01/app/oracle/oradata/LHR19CDG/','/u01/app/oracle/oradata/LHR19C/' scope=spfile;

alter system set log_file_name_convert='/u01/app/oracle/oradata/LHR19CDG/','/u01/app/oracle/oradata/LHR19C/' scope=spfile;

alter system set standby_file_management=auto scope=spfile;

alter system set fal_client='lhr19c'

alter system set fal_server='lhr19cdg' sid='*';

alter system set local_listener='(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.59.52)(PORT=1522)))','(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.59.52)(PORT=1521)))';

shutdown immediate

startup

  

  

--备库修改参数

alter system set LOG_ARCHIVE_DEST_1='LOCATION=USE_DB_RECOVERY_FILE_DEST  VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=lhr19cdg' scope=spfile;

alter system set log_archive_config='dg_config=(lhr19c,lhr19cdg)';

alter system set db_file_name_convert='/u01/app/oracle/oradata/LHR19C/','/u01/app/oracle/oradata/LHR19CDG/' scope=spfile;

alter system set log_file_name_convert='/u01/app/oracle/oradata/LHR19C/','/u01/app/oracle/oradata/LHR19CDG/' scope=spfile;

alter system set standby_file_management=auto scope=spfile;

alter system set fal_client='lhr19cdg'

alter system set fal_server='lhr19c' sid='*';

alter system set local_listener='(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.59.52)(PORT=1522)))','(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.59.52)(PORT=1521)))';

  

shutdown immediate

startup

alter system register;

  

  

--备库查询实时应用

alter database recover managed standby database cancel;

alter database recover managed standby database using current logfile disconnect;

! ps -ef|grep ora_mrp

  

select INST_ID, dbid,name,DB_UNIQUE_NAME,current_scn,protection_mode,database_role,force_logging,open_mode,switchover_status from gv$database;

  

COL NAME FOR A100

SET LINESIZE 9999  PAGESIZE 9999

COL NEXT_CHANGE# FOR 999999999999999

SELECT THREAD#, NAMESEQUENCE#, ARCHIVED, APPLIED, A.NEXT_CHANGE#

  FROM V$ARCHIVED_LOG A

 WHERE A.SEQUENCE# >= (SELECT MAX(B.SEQUENCE#) - 3

                         FROM V$ARCHIVED_LOG B

                        WHERE B.THREAD# = A.THREAD#

                          AND B.RESETLOGS_CHANGE# = A.RESETLOGS_CHANGE#

                          AND B.RESETLOGS_CHANGE# =

                              (SELECT D.RESETLOGS_CHANGE# FROM V$DATABASE D)

                          AND B.APPLIED = 'YES' 

  GROUP BY B.THREAD#)

 ORDER BY A.THREAD#, A.SEQUENCE#;

 

转载地址:http://pmiof.baihongyu.com/

你可能感兴趣的文章
【JMeter】如何用JMeter进行压力测试
查看>>
【Python练习】文件引用用户名密码登录系统
查看>>
学习网站汇总
查看>>
【Jmeter】如何通过文件导入方式对用户名和密码进行参数化设置
查看>>
【Python】用Python打开csv和xml文件
查看>>
【JMeter】集合点的设置
查看>>
硬盘与内存的区别和联系
查看>>
【代码备份】ZJ10086测试环境成功代码备份
查看>>
【Python】【爬虫】如何学习Python爬虫?
查看>>
【Linux】通过top语句可以查看压力测试的实时服务器状态。(可以通过百度Linux top查看相关内容)...
查看>>
【Python】Python基础
查看>>
东风乘用车文件活动视频播放压测脚本备份
查看>>
【Javascript】Windows下Node.js与npm的安装与配置
查看>>
【接口测试】接口概念及Json相关
查看>>
【Python项目篇】【爬妹子图】
查看>>
【Loadrunner】性能测试报告实战
查看>>
【英语】软件测试工程师相关英文词汇
查看>>
如何在python3.5环境下安装BeautifulSoup?
查看>>
python笔记9-多线程Threading之阻塞(join)和守护线程(setDaemon)
查看>>
【面试】一份自我介绍模板
查看>>